Looking for beautiful and low-consumption floor lighting?
But don’t want to carve cavities into the floor afterward?
Here’s the solution!
The LED floor lighting is only 8 mm thick, so it can perfectly fit into laminate flooring up to 8mm thick.
Can be installed in both cold and warm flooring, suitable for interior and exterior use.
The light source can be popped out from its aluminum housing.
Parameters of the built-in LED floor lighting:
- The product lifespan is over 30,000 hours (so even if it lights up for 8 hours a day, it can be used for more than 10 years).
- The LEDs designed for white light emission have no infrared or UV range emissions.
- Not sensitive to switching, but cannot be used with dimmers.
- 9 pcs DIP LEDs
- 0.5 W consumption,
- 60-degree beam angle,
- IP65 protection
- Installation data:
- Outer diameter: 55mm
- Drill hole: 45.5mm
- Installation depth: 8mm
- Lead length: max. 2m
- No socket – requires soldering, assembly.
- Can be installed in both cold and warm flooring, suitable for interior and exterior use. Due to its low installation depth, it can be embedded in laminate flooring as thin as 8mm.
- The light source can be easily popped out from its aluminum housing.
- Maximum load capacity 100kg.
- Can be operated with an iron-core transformer, but it does not protect against mains voltage fluctuations, so the use of a special LED driver is recommended. It cannot be operated with electronic transformers for halogen spots – or it won’t work!
Available for purchase: HERE